Avocent HMX Manager Betriebsanweisung PDF herunterladen (Seite 10)

4 HMX Manager Installer/User Guide

• Always test every installed segment with a cable tester. “Toning” alone is not an acceptable

test.

• Always install jacks so as to prevent dust and other contaminants from settling on the contacts.

The contacts of the jack should face up on the flush mounted plates, or left/right/down on

surface mount boxes.

• Always leave extra slack on the cables, neatly coiled in the ceiling or nearest concealed

location. Leave at least five feet at the work outlet side and 10 feet at the patch panel side.

• Choose either 568A or 568B wiring standard before beginning. Wire all jacks and patch panels

for the same wiring scheme. Do not mix 568A and 568B wiring in the same installation.

• Always obey all local and national fire and building codes. Be sure to firestop all cables that

penetrate a firewall. Use plenum rated cable where it is required.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

Keine Kommentare

Avocent HMX Manager Betriebsanweisung Seite 10