Avocent Network Adapter EMS1000P Betriebsanweisung Seite 48

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 80
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 47
Parameter Description
Phone No. The phone number to dial to.
Speed
The speed that will be used to
configure the serial device
and communicate with the
connected modem.
Init Chat Chat for modem initialization.
Local IPv4/IPv6 Address
Configures the local
IPv4/IPv6 address for this
PPPconnection. If empty,
PPPwill accept the address
from the remote peer.
Remote IPv4/IPv6 Address
Configures the remote
IPv4/IPv6 address for this
PPPconnection. If empty,
PPPwill accept the address
from the remote peer.
PPPAuthentication Protocol
PPP Idle Timeout
Number of seconds being
idle before PPPtimes out.
Default:0 (no time-out).
CHAP
To configure the Socket Client Profile for a serial port with a connected device:
1. Select Ports - Serial Ports.
2. Click the checkbox for a serial port with a connected device.
3. Click Set Socket Client and use the drop-down menus to configure the physical settings.
4. Configure the Socket Client Settings (remote server address, TCP port and event trigger) and click Save.
Parameter Description
Enable Cisco RJ-45 Pin-Out Defines the serial port pinout.
Status
Defines the status of the serial
port as either enabled or
disabled. Default:Disabled.
Speed
Defines the speed as 300,
1200, 2400, 4800, 9600,
19200, 38400, 57600, 115200
or 230400. Default:9600.
Parity
Defines the parity as Even, Odd
or None. Default:None.
Data Bits
Defines the data bits as 5, 6, 7
or 8. Default:8.
Stop Bits
Defines the stop bits as 1 or 2.
Default:1.
Flow Control
Defines the flow control as
none, hardware, software,
RxON software or TxON
software. Default: None.
Table 3.10: Socket Client Parameters
40 Cyclades™ ACS 6000 Advanced Console Server
Seitenansicht 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 79 80

Kommentare zu diesen Handbüchern

Keine Kommentare