Avocent MergePoint 5200 Bedienungsanleitung PDF herunterladen (Seite 6)

18. ILOM‟s KVM/VM applet needs input username and password manually.

General Notes:

1. Browser session functionality is implemented as pure port forwarding. The web interfaces of some SPs

may work abnormally in this mode regardless of the port forwarding implementation. Sometimes,

DirectCommand session options are not presented after enabling DirectCommand through the OBWI

when running Firefox 3.5. If this occurs, we recommend downgrade to Firefox 3.0.11.

2. If login prompts are presented during autologin DirectCommand sessions, the login username/password

associated with that SP stored within the MergePoint SP manager may need to be reentered.

================================================================

4. Constraints and Conditions

================================================================

This release includes the following constraints or conditions:

1. Usernames under User Configuration must be all in lowercase letters.

2. BMC Provisioning can only be configured on the secondary Ethernet Interface (eth1).

3. We support alias for every SP. Do not use special characters in the alias. Only the following characters

are allowed: “0—9”, “a—z”, “A—Z” and “-“.

4. Power outage during the upgrading process is not recoverable.

5. Not allowed to use special characters in the SP‟s password. We do not support the characters like >‟, „<‟, “‟”,

“””,”&” or “|”.

6. Configuration of a private subnet range within 192.168.0.1 to 192.168.0.255

Please note that the MergePoint SP manager reserves 192.168.0.10 and 192.168.0.20 as default

addresses for eth0 and eth1 respectively. To configure a private subnet using this 192.168.0.x address

range, the eth0 and eth1 addresses must be moved from this range. If IP address conflicts occur after

reconfiguring, please contact Avocent Technical Support for a work instruction with more details.

1 2 3 4 5 6

Keine Kommentare

Avocent MergePoint 5200 Bedienungsanleitung Seite 6