Avocent AMX5000 Betriebsanweisung Seite 79
- Seite / 248
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Chapter 3: Operations 67
2. Type fc ‘[TargetUserStationName]’ ‘[servername]’ and press Enter to force the target user
station to connect to the specified target device.
-or-
Type
fd ‘[TargetUserStationName]’ and press Enter to force the target user station to
disconnect from the connected target device.
Forcing a connection from the serial port to a target device
Once Serial Force mode is enabled, a serial device attached to the host user station can send a force
connect or disconnect command to that user station. The host user station will then force the target
user station to either connect to or disconnect from a target device.
To enable Serial Force mode:
Select Serial
Force Mode on the lockdown settings for the user station. See Locking user station
settings on page 56 for more information.
-or-
Enter
enable serial force mode at the Command Line. See OSD Command Line Operations on
page 61 for more information.
Serial parameters
Once Serial Force mode is enabled, the serial
port parameters are set to:
• 9600 baud
• 8 data bits
• no parity
• 1 stop bit
• no flow control
These parameters cannot be changed. The serial confi
guration settings of the serial device attached
to the host user station must match these parameters.
To disable Serial Force mode:
Deselect Seria
l Force Mode on the lockdown settings for the user station. See Locking user station
settings on page 56 for more information.
-or-
Enter
disable serial force mode at the Command Line. See OSD Command Line Operations on
page 61 for more information.
Once disabled, the serial baud rate will be changed to 57600. The serial emulation will change to
the current
value for the user’s settings.
To force a user station to make a connection:
1. Make sure that the serial device is configured appropria
tely. See Serial parameters on page 67
for more information.
AMX.book Page 67 Thursday, June 12, 2008 4:14 PM
- Switch Series 1
- Switch Series 3
- Table of Contents 5
- Table of Contents v 7
- List of Figures 9
- List of Tables 11
- Product Overview 13
- Glossary 15
- Component Overview 16
- The AMX switch 17
- The AMX user station 17
- The AMX switch IQ modules 18
- UTP cables 18
- Safety Precautions 19
- AMIQ-SRL modules 22
- Rack Mounting an AMX Switch 25
- Installing an AMX Switch 25
- Support for assistance 27
- AMX Switch 33
- Installing AMWorks Software 38
- Configuring AMWorks software 39
- Using nVision routers 40
- Unit LEDs 41
- AMX user station 42
- IQ module 43
- Operations 45
- OSCAR interface tabs 46
- Target Devices 47
- Ctrl+Up hotkey 49
- Setting a local switch hotkey 50
- Setting a target flag 51
- Scanning the switching system 53
- tab, then select Scan 53
- button to begin scanning 53
- Figure 3.10: User Screen 54
- Logging in as a user 55
- Logging out 56
- Managing the user database 56
- Figure 3.13: Add User Screen 57
- Configuring Keyboard Settings 60
- Keyboard type 62
- Keyboard translation 63
- User Stations 67
- Locking user station settings 68
- Persistent mode 69
- Setting Device Properties 70
- OSD Command Line Operations 73
- Accessing the Command Line 74
- Disabling Auto User Login 75
- Equalization tuning 75
- Deskew tuning 76
- Configuring the DDC table 77
- Code Definition 81
- Terminal Operations 83
- Appendices 87
- Appendices 77 89
- Appendices 79 91
- Appendices 81 93
- Appendices 83 95
- AMIQ-SRL module modes 97
- Configuration Screen 99
- AMIQ-SRL module pinouts 100
- Language support 101
- Appendices 91 103
- Appendix D: Pod Switch Mode 105
- Enabling Pod Switch mode 107
- Performing a Pod Switch 107
- Appendix E: Troubleshooting 109
- Appendices 99 111
- Appendix F: Command Functions 112
- Appendices 101 113
- Appendix G: Technical Support 115
- Index 107 119
- Index 109 121
- USA Notification 123
- Canadian Notification 123
- Japanese Approvals 123
- Commutateurs de la série AMX 125
- Table des Matieres 127
- Table des Matieres v 129
- Liste des Figures 131
- Liste des Tableaux 133
- Présentation du produit 135
- Glossaire 138
- Présentation des composants 138
- Commutateur AMX 139
- Console utilisateur AMX 140
- Câbles UTP 140
- Mesures de sécurité 141
- Installation 143
- Entrée 148
- 00000 en tant 149
- Les consoles 162
- Pinnacle ou Chyron 162
- Voyants de l’unité 164
- Module IQ 166
- Fonctionnement 167
- Onglets de l’interface OSCAR 168
- Équipements cibles 169
- Accès aux équipements cibles 170
- Configure 172
- pour lancer le balayage 176
- Utilisateurs 177
- Déconnexion 178
- Figure 3.13 : Écran Add User 179
- Configuration clavier 182
- Type de clavier 184
- Traduction du clavier 186
- Alimentation 187
- Consoles utilisateur 190
- Mode persistant 192
- Réglage de l’égalisation 198
- Réglage du réalignement 199
- Configuration du tableau DDC 200
- Opérations de terminal 205
- Annexes 79 213
- Annexes 81 215
- Annexes 83 217
- Annexes 85 219
- Modes du module AMIQ-SRL 221
- -Saut de ligne) 222
- Brochage du module AMIQ-SRL 225
- Compatibilité multilingue 225
- Annexes 93 227
- Introduction 229
- Configuration requise 229
- Configuration 230
- Annexes 97 231
- Verr Num +. Pour de 231
- Alt + 1 232
- Annexe E : Dépannage 233
- Annexes 101 235
- Annexes 103 237
- Annexes 105 239
- Index 111 245
Verwandte Produkte und Handbücher für KVM-Schalter Avocent AMX5000
KVM-Schalter Avocent 2015 Betriebsanweisung
(134 Seiten)
(134 Seiten)
KVM-Schalter Avocent 1000 Betriebsanweisung
(20 Seiten)
(20 Seiten)
(2 Seiten)
KVM-Schalter Avocent DSR1021 Betriebsanweisung
(72 Seiten)
(72 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.086 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern