Avocent ECMS2000U Betriebsanweisung PDF herunterladen (Seite 51)

Chapter 3: Operations 45

To disable or enable the transmitter password:

1. Press 1 to access the Console password menu on the Security Configuration Menu and press

Enter. If a password has been enabled, this action will disable the password.

2. If a password has been disabled, you will be prompted to enter a password.

3. Type the new password and press

Enter.

NOTE: Each password must consist of ASCII characters and contain between 6 and 64 characters.

4. Confirm the new password. If successful, you will see a message stating that the password has

been changed.

5. Press Enter.

6. To save your changes and exit the menu, type 0 (zero) and press Enter.

To change the transmitter password:

1. Press 2 to access the Change Console password menu on the Security Configuration Menu and

press Enter. You will be prompted to enter your current password.

2. Type your current password and press Enter. You will be prompted to enter the new password.

3. Type the new password and press Enter.

NOTE: Each password must consist of ASCII characters and contain between 6 and 64 characters.

4. Confirm the new password. If successful, you will see a message stating that the password has

been changed.

5. Press Enter.

6. To confirm the new password and exit the screen, type 0 (zero) and press Enter.

Flash Upgrading your Emerge digital extender system

You can Flash upgrade your ECMS user station and transmitter using either XMODEM or HTTP.

The ECMS user station and transmitter are upgraded separately using individual upgrade files. The

upgrade files are supplied by Avocent. For optimum system performance keep your firmware

versions current.

NOTE: Do not use software (XON/XOFF) flow control when using XMODEM.

NOTE: It is recommended that you flash upgrade the transmitter before you flash upgrade the ECMS user

station. Transmitters and user stations should have the same version for guaranteed operation.

To Flash upgrade your transmitter using XMODEM:

1. Download the transmitter upgrade file from Avocent.

2. Press Enter to display the Serial Menu.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 91 92

Keine Kommentare

Avocent ECMS2000U Betriebsanweisung Seite 51