Avocent Server ACS 6000 Bedienungsanleitung PDF herunterladen (Seite 34)

To set up a console access service (CAS) port:

1. Log onto the CLI as an administrator.

--:- / cli->

2. Enter set_cas ports/serial_ports/ followed by a space and the number of the port you

want to configure (port 1 is used as an example).

--:- / cli-> set_cas ports/serial_ports/ 1

3. Enter show to view the status of port 1.

Selected items: 1

Port: 1

enable_cisco_rj45_pin-out = no

status = enabled

speed = 9600

parity = none

data_bits = 8

stop_bits = 1

flow_control = none

Type ls to see available sub-nodes.

--:#- [serial_ports/physical] cli->ls

cas/

data_buffering/

alerts/

power/

Type show to see the content of the page.

--:#- [serial_ports/physical] cli->

4. Enter set status=enabled, then enter show and save as shown to enable the configured

port and verify and save the configuration.

--:- serial_ports/physical cli-> set status=enabled

--:- serial_ports/physical cli-> show

--:- serial_ports/physical cli-> save

To enable a power management port:

1. Log onto the CLI as an administrator and enter set_power ports/serial_ports/ <port

number> to select a port with a PDU connected (port 3 is used as an example).

--:- / cli-> set_power ports/serial_ports/ 3

26 Cyclades™ ACS6000 Advanced Console Server Command Reference Guide

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 72 73

Keine Kommentare

Avocent Server ACS 6000 Bedienungsanleitung Seite 34