Avocent Server ACS 6000 Bedienungsanleitung PDF herunterladen (Seite 43)

Network Navigation Tree

primary_dns=

secondary_dns=

enable_ipv6=

get_dns_from_dhcpv6=

get_domain_from_dhcpv6=

enable_ipv4_multiple_routing_tables=

Network/IPv4 and IPv6

IPv4 addresses are always enabled. An administrator can also enable IPv6 addresses at the

appliance_settings/network/ipv6 level. A procedure to enable IPv6 is used as an example in

CLI Equivalent Actions to Web Manager Checkbox Selection on page 19.

IPv4 and IPv6 Navigation Tree

ipv4_static_routes

default_3

gateway=

interface=

metric=

ipv6_static_routes

Table 4.7: Network/IPv4 and IPv6 Options

Network/Devices

The procedure to configure a static IP address for the primary Ethernet interface is usually

performed during installation so that administrators have a fixed IP address for access to the

web manager and can finish configuration.

To configure a IPv4 or IPv6 static IP address:

NOTE: This procedure configures either an IPv4 or IPv6 static IP address for the ETH0 (eth0) or the ETH1 (eth1)

port. You can configure an IPv6 static IP address only if IPv6 is enabled.

Chapter 4: CLI Overview for Administrators 35

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 72 73

Keine Kommentare

Avocent Server ACS 6000 Bedienungsanleitung Seite 43