Avocent AutoView 2000 Betriebsanweisung PDF herunterladen (Seite 20)

10 AutoView 2020/2030 Installer/User Guide

To cascade multiple AutoView 2020/2030 switches:

1. Connect the cascaded AutoView 2020/2030 switch to each server as described in the previous

Installing the AutoView 2020/2030 Switch section.

2. Connect the local peripherals to analog user A of the main switch as described in To connect

local peripherals.

3. Attach one end of the CAT 5 cabling that will run between your main and cascaded AutoView

switch to the RJ-45 (ACI) port on the cascaded AutoView switch.

4. Attach the other end of the CAT 5 cable to one of the 16 RJ-45 (ARI) ports on the main

AutoView 2020/2030 switch.

NOTE: The system will automatically “merge” the two switches. All servers connected to the cascaded AutoView

2020/2030 switch will display on the main AutoView 2020/2030 switch server list in the OSCAR interface.

Figure 2.2: AutoView 2020/2030 Switch Configuration with a Cascaded Switch

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 121 122

Keine Kommentare

Avocent AutoView 2000 Betriebsanweisung Seite 20